Toolkit for the preparation of the implant site near Schneiderian membrane. Specific for the innovative technique “CRESTAL SINUS LIFT”, which allows obtaining a Crestal split osteotomy controlled with an easier lifting of the maxillary sinus membrane, maximum security and direct fitting of the implant even in crestal residual cases.
All the instruments present in the kit are made of hardened steel and are characterized by their oxidation-resistance and high wear resistance. The cutting capability of compactors – expanders is guaranteed, however, it is recommended to always monitor their cutting edge.
The CRESTAL SINUS LIFT technique can be used in a range of residual bone availability from 4 to 9 mm and in any anatomic condition that is enough to ensure implant stabilization in the site. It is necessary to take precautions, for this reason, appropriate X-rays, palpations and visual checks of the site must be done to identify the structure of the available bone. This system supports any type of regenerative materials that are certified.
1] Dismantle all the compound parts.
2] Rinse abundantly with cold or lukewarm water for 2-5 minutes.
3] Leave the instruments for 10 minutes in an ultrasonic cleaner with a neutral pH. enzymatic detergent diluted in water according to the product instructions.
4] Wash the instruments with water for 3 minutes.
The guidelines for sterilization are listed below.
Exceeding these sterilization limits may cause deterioration of the plastic components.
Type of cycle (value)
132 / 270
134 / 273
121 / 250
standard pilot drill
standard preliminary drill
standard drill h 5 mm
standard drill h 6 mm
standard drill h 7 mm
standard drill h 8 mm
standard body lift
advanced pilot drill
advanced preliminary drill
advanced drill h 2 mm
advanced drill h 3 mm
advanced drill h 4 mm
advanced body lift
rachet body lift